Starting…

Bandolibre boards are picked automatically. Pick another device here to override; it stays selected until it disconnects.

Keyboard system

Notes each key plays

Bellows program

Response curve edited in the graph below

Table mode

Bellows always pulling

Showing defaults — connect to read and tune the live device.
0 127 expression CC#11 sensor reading
sensor — → CC#11 —

Drag the vertical lines and the curves' control points to tune the response.
Hold Shift while dragging for fine adjustment.

Presets
Bellow center
Sensor value at rest (shared by all bellows programs)
Deadzone: travel each way before registering direction
32
Push curve
How far the sensor reading drops below the center at full push
Pull curve
How far the sensor reading rises above the center at full pull
Pedals

Drag the min / max lines (or edit the numbers) to calibrate each pedal's sensor range. Hold Shift while dragging for fine adjustment.

Pedal 1 — Expression
Not connected to device.
sensor — → CC —
Pedal 2 — Sustain
Not connected to device.
sensor — → CC —
Key Showing defaults — connect to plot the key sensor live.
Key triggering
key sensor reading, ADC (falls as the key goes down)
last key pressed — → sensor —
Key press
note-on velocity strike speed, ADC counts per 10 ms
press a key
Speed range
Note-on velocity
Key release
note-off velocity release speed, ADC counts per 10 ms
release a key
Speed range
Note-off velocity
Keyboards
Left
Right
Properties

Not connected.

Activity 0.0 kb/s