Bandolibre MIDI Connect
Starting…
Bandolibre boards are picked automatically. Pick another device here to override; it stays selected until it disconnects.
Showing defaults — connect to read and tune the live device.
sensor —
→
CC#11 —
Hold Shift while dragging for fine adjustment. Shown at unity sensitivity; hysteresis not shown (deadzone lines use bellow_dead only).
Presets
Bellow center
Sensor value at rest
Deadzone: travel each way before registering direction
Push curve
Bellow sensor reading at full push
P1 — near center
P2 — near full travel
Pull curve
Bellow sensor reading at full pull
P1 — near center
P2 — near full travel
Drag the min / max lines (or edit the numbers) to calibrate each pedal's sensor range. Hold Shift while dragging for fine adjustment.
Pedal 1 — Expression
Not connected to device.
sensor —
→
CC —
Pedal 2 — Sustain
Not connected to device.
sensor —
→
CC —
Tuning
Selects which mapping from key to notes is used: Rheinische, Peguri, or Manoury.
Bellows sensitivity
How much bellows travel is needed for full expression (CC#11) - higher levels reach full swing with less push/pull. Also cycled by the FN1 button.
Table mode
Pins the bellows direction to PULL so keys sound with the instrument resting on a table.
Left wing
Right wing
Not connected.
| # | Name | Value | Default | Description |
|---|
0.0 kb/s